DIY GUIDE
Getting your Smeg washing machine up and running is easier than you might think. Whether you’re installing a brand-new model or setting up a replacement, this guide will walk you through the necessary steps to ensure your machine operates smoothly from the start. With its sleek design and advanced features, your Smeg washing machine is built to deliver outstanding performance – and we’re here to help you make the most of it. Let’s dive into the process!
Need some help? Get official Smeg customer service.
-
1. Preparation is Key
Before you even think about unpacking your SMEG washing machine, there are a few crucial things to do.
- Choose the perfect spot. Ideally, this should be a level, well-ventilated area with easy access to a water supply and drain. Consider proximity to a power outlet.
- Measure the space. Ensure enough clearance for the washing machine dimensions, including door opening space. Refer to your user manual for exact measurements.
- Check your plumbing. Make sure you have the correct water supply connections (hot and cold or cold only). Also, ensure your drain pipe is in good condition and can accommodate the washing machine's drainage hose.
-
2. Unboxing and Inspection
Now for the exciting part!
- Carefully unpack your SMEG washing machine.
- Remove any packaging materials, including the polystyrene base and protective film.
- Check for any visible damage.
- Retain the packaging for warranty purposes.
- Locate the user manual and accessory pack. This usually includes items like the drain hose, inlet hoses, and transit bolts.
-
3. Removing the Transit Bolts
Transit bolts are essential for securing the washing machine drum during transportation.
- Locate the transit bolts at the back of the machine.
- Use a wrench to carefully unscrew them.
- Keep the transit bolts in a safe place for future use (e.g., if you move).
- Cover the bolt holes with the plastic caps provided in the accessory pack.
-
4. Connecting the Water Supply
This step requires connecting the inlet hoses to both the washing machine and your water taps.
- Attach the inlet hoses to the designated connections on the back of the washing machine. Hand-tighten first, then use pliers for a secure fit, but avoid over-tightening.
- Connect the other ends of the hoses to your hot and cold water taps, ensuring the correct hose is attached to the corresponding tap.
- Turn on the water taps slightly to check for leaks. Tighten connections further if necessary.
-
5. Positioning and Levelling
- Carefully move the washing machine into its designated position.
- Use a spirit level to ensure the machine is level both horizontally and vertically.
- Adjust the feet by rotating them until the machine is perfectly level.
- Lock the adjustable feet in place to prevent any movement during operation.
-
6. Connecting the Drain Hose
the drain hose directs wastewater from the washing machine to your drainage system.
- Attach the drain hose to the designated outlet at the back of the washing machine.
- Ensure the hose is securely fastened to prevent leaks.
- Position the other end of the drain hose into a standpipe or sink. The hose should be at a height of 65-100cm from the floor to prevent backflow.
- Secure the hose to prevent it from slipping out during the wash cycle.
Tools
- 1. wrench
- 2. Spirit level
- 3. Pliers
Frequently asked questions
-
1. How to start a Smeg washer?
- Organise the Laundry: Load clothes evenly and avoid overloading..
- Add Detergent: Put the correct amount in the detergent drawer.
- Select a Program: Use the program dial to choose the appropriate wash cycle.
- Adjust Settings: Modify temperature, spin speed, or add options like delay start if needed.
- Start the Machine: Close the door securely and press the “Start/Pause” button to begin.
Consult your model’s user manual for detailed instructions tailored to your machine
-
2. Why is my Smeg washing machine not working?
common issues include
- Power Issues: Check the power supply, plug, and fuse.
- Door Not Closed: Ensure the door is shut properly, as the machine won’t start otherwise.
- Blocked Filters or Drains: Clogged filters or hoses can prevent operation.
- Error Codes: Look for displayed error codes in the manual for specific troubleshooting.
- .Overload: Excessive laundry can disrupt cycles.
- .Water Supply Problems: Ensure the water tap is open and hoses are correctly connected.
- For persistent issues, consult your manual or a technician.
-
3. Is it difficult to set up a washing machine?
- Placement: Position the machine on a level surface to avoid vibrations.
- Remove Transit Bolts: Detach these bolts to prevent damage during operation.
- .Connect Water Supply: Attach hoses to the correct taps and ensure they are tightly sealed.
- Attach Drain Hose: Secure it to a drain at the correct height (usually 40–100 cm).
- plug In: Use a properly grounded outlet.
- With basic tools and care, most people can set it up without difficulty.