Samsung dishwasher wont turn on? Read our guide
A faulty dishwasher can disrupt any household routine. While Samsung dishwashers are well known for their reliability, they can occasionally experience some issues. Our comprehensive guide addresses common problems specific to Durban homeowners, providing troubleshooting steps and professional solutions.
Causes of Samsung Dishwasher faults
Power Supply Interruptions:
- Outlet and Breaker: Verify that the dishwasher is properly plugged into a functioning outlet and that the circuit breaker hasn’t tripped due to power fluctuations, which are not uncommon in Durban.
- Fuse Inspection: For dishwashers with a fuse, check to make sure it hasn’t blown.
Door Latch Failure:
- Secure Closure: Samsung dishwashers are designed to initiate cycles only when the door is completely closed and latched. Ensure no obstructions hinder the latching mechanism.
- Physical Damage: Inspect the latch for signs of wear, damage, or debris accumulation.
Control Panel Errors:
- Child Lock Activation: Check if the child lock feature is engaged, a frequent cause of unresponsive control panels.
- Button Responsiveness: Verify that the control panel buttons register when pressed.
Water Supply Disruptions:
- Water Inlet Valve: Confirm that the water supply valve, typically located beneath the sink, is fully open.
- Hose Obstructions: Inspect the water supply hose for kinks, bends, or blockages that could restrict water flow.
Troubleshooting Steps
Samsung dishwasher wont start? Try these steps
- Power Supply Assessment:
- Secure Connection: Double-check that the dishwasher is plugged into a functional outlet.
- Circuit Breaker Reset: If the circuit breaker has tripped, reset it.
- Door Latch Inspection:
- Firm Closure: Ensure the door closes completely, resulting in an audible click that confirms proper latching.
- Latch Cleaning: Wipe the latch mechanism with a damp cloth to remove any debris or residue.
- Control Panel Verification:
- Child Lock Deactivation: Refer to your user manual to disable the child lock feature if activated.
- Cycle Initiation: Choose a wash cycle and press the start button firmly.
- Water Supply Evaluation:
- Water Supply Activation: Confirm that the water supply to the dishwasher is turned on.
- Hose Straightening: Carefully remove any kinks or bends in the water supply hose.
advanced troubleshooting
Consider doing the following
- Dishwasher Reset: Unplug your dishwasher for 10 minutes to potentially reset the control board.
- Filter Cleaning: Remove and thoroughly rinse the filters to eliminate mineral buildup caused by Durban’s hard water.
- Door Switch Testing: Locate and gently press the door switch (refer to your manual for its location) to ensure proper functionality.
For persistent problems please contact us
Smart Appliance Centre CC
- Address: 14 Blackburn Road, Parkhill, Durban North, 4051
- Phone: 031 562 0666
prevention
- Rinse Aid Utilization: Regularly use rinse aid to mitigate water spots caused by hard water.
- Filter Maintenance: Routinely clean the filters to prevent debris accumulation and ensure optimal dishwasher performance.
- Door Ajar: After each cycle, leave the dishwasher door slightly open to facilitate interior drying and inhibit mold growth in Durban’s humid climate.
By following these troubleshooting steps and adopting preventative maintenance practices, you can ensure the longevity and optimal functionality of your Samsung dishwasher.
Book a repair with us
What to do if your Samsung dishwasher won't start?
Basic Checks
• Check power supply: Ensure circuit breaker is not tripped.
• Check dishwasher switch: Turn on the separate wall switch for the dishwasher.
• Check door latch: Ensure the door is securely closed.
• Check control panel: Deactivate Child Lock if activated.
• Check Delay Start: Check if it has been accidentally set.
• Press and hold the Start button for a few seconds.
Further Troubleshooting
• Check water supply: Ensure the water supply valve is fully open.
• Check kinked hose: Check for any restrictions on water flow.
• Inspect drain hose: Check for clogs or obstructions.
• Check error codes: Consult the user manual for the issue.
If the problem persists, reset the dishwasher: Unplug it and plug it back in.
• Contact Samsung Support: Contact Samsung customer support for further assistance.
• If an electrical issue is suspected, contact a qualified appliance repair technician.
My Samsung dishwasher display is blank. What should I do?
Here are some steps you can take:
- Check the Power: Ensure the dishwasher is plugged in and the circuit breaker is on.
- Reset the Dishwasher: Unplug the dishwasher for a few minutes, then plug it back in. This can sometimes clear minor glitches.
- Inspect the Control Panel: Look for any signs of damage or stuck buttons. If you notice anything amiss, it might be time to call a repair technician.
What is the average life of a Samsung dishwasher?
The average life expectancy of a Samsung dishwasher is around 10 years.
It’s important to understand that this is an average, and the actual lifespan of your dishwasher can vary depending on factors like usage, maintenance, and the specific model.
The lights on my Samsung dishwasher are flashing. What does this mean?
Flashing lights on your Samsung dishwasher usually indicate an error code. Refer to your dishwasher’s manual to decipher the specific code and its corresponding troubleshooting steps. If you can’t find the manual, search online for “Samsung dishwasher error codes” followed by the specific model number of your appliance.
My Samsung dishwasher starts but then stops. What's going on?
This could be due to several reasons:
- Overloading: Too many dishes can obstruct the spray arms and cause the dishwasher to shut off prematurely.
- Clogged Filter or Drain: A clogged filter or drain can prevent proper water flow and trigger a safety shutdown.
- Water Supply Issues: Make sure the water supply valve is fully open and there are no kinks in the hose.
- Internal Component Malfunction: Issues with the motor, pump, or other internal parts might require professional repair.